Troubleshooting - Lionel 7-11000 Owner's Manual

Maintenance and operations

Troubleshooting

The train will not run and the locomotive light is not on. The locomotive cab light is
blinking.
1. Check to see if the wireless controller is in the OFF position.
2. After checking the above and if the light is still not on replace the 6 'C' batteries in the
locomotive. Be sure the batteries are oriented as indicated in the battery compartment (see
page 8 and 9). After replacing the batteries, slide the switch to the ON position.
The train will not run but the engine headlight and sounds are on.
1. Check to make sure the wireless controller power switch is in the ON position. This will be
indicated by the red LED being illuminated.
2. Try moving the controller closer to the locomotive. Although designed for an optimal range
of 10 feet, the signal can be weakened by a metal object or other interference.
3. Be sure the controller is not lying flat on the floor and the controller is positioned above the
level of the train.
4. Replace the 3 'AAA' batteries in the controller (see page 7). Be sure that the batteries are
oriented as indicated in the battery compartment.
The train will not run and the cab light is flickering.
1. Check to see if your wireless controller's power light is on. Give the train a new command
such as the whistle button. If the lamp remains flickering and the whistle will not sound,
either your locomotive or controller needs repair. If the cab light changes to a steady white
glow and the whistle does not sound, your locomotive needs repair. Please contact Lionel
service. See page 16.
The train runs, but the wheels slip on the track.
1. Check the top of the track rails and rubberized drive wheels for dirt or grease. Clean with a
soft dry or slightly dampened cloth.
2. Check to see that all of the wheels of both the locomotive, tender and cars are located
properly on the track.
White cab light.
Under normal conditions
the cab light will turn on
as the train runs.
15