Lionel 7-11000 Owner's Manual page 8

Battery installation and options
Installing 'C' batteries into the Berkshire Locomotive
U
sing a Phillips Head screwdriver, have an adult loosen the screw on the battery
compartment cover. Push down on the battery tray locking mechanism to allow the tray
to slide out of the cavity inside the locomotive. Once the battery tray has been removed install
6 'C' Alkaline Batteries (not included). Please be sure the +/- of each battery is positioned as
shown in the battery compartment. See Figure 5(a/b).
Use Alkaline 'C' batteries. Use only new batteries. Never mix new and used
Important!
batteries or use different types together.
Close the battery compartment by inserting the slot on the top end of the cab interior lid
into the retaining rib. Then close the bottom end of the lid and secure by tightening the
Phillips Head screw.
Loosen screw
Figure 5a. Installing 'C' batteries in the Berkshire Locomotive
REAR
Once the batteries are loaded, the screw should be tightened
all the way to ensure that the battery contacts stay in place
between the battery holder and the spring contacts.
Berkshire Locomotive
8
Remove the cover from the cab
and press down to remove
the battery tray
FRONT