Battery Installation And Options; Installing Aaa Batteries Into The Remote Control - Lionel 7-11000 Owner's Manual

Battery installation and options

Installing AAA batteries into the Remote Control

U
sing a Phillips Head screwdriver, have an adult loosen the screw on the battery
compartment cover. Once the battery tray has been removed (as shown in figure 4)
install 3 'AAA' Alkaline Batteries (not included). Please be sure the +/- of each battery is
positioned properly in the battery compartment. Replace the battery door and tighten the
Phillips head screw. Be careful to avoid over-tightening the screw.
Use only Alkaline 'AAA' batteries. Use only new batteries. Never mix new and used
Important!
batteries or use different types together.
Figure 4. Opening and closing the battery compartment
REMOVE ALL BATTERIES WHEN THE TRAIN WILL NOT BE USED FOR AN
Important!
EXTENDED PERIOD OF TIME. LIONEL'S LIMITED WARRANTY DOES NOT
COVER DAMAGE TO YOUR REMOTE CAUSED FROM LEAKING BATTERIES.
When you are not operating the train, slide the On/Off switch to the
Important!
OFF position to conserve the battery life.
7
Remove the cover