Table of Contents
Advertisement
Using the LionChief App
Troubleshooting
• If the locomotive does not appear in the App's "engine selection carousel, " try turning the
track power off, wait 5 seconds and turn it back on. If that still doesn't work, try restarting
the app on your device.
• If a universal remote is present and powered on, make sure one of its 3 channels is not
connecting to your locomotive before the app is able to connect.
• Make sure that your smart device's Bluetooth is turned on. This is done outside of the
LionChief app.
• If equipped, check the engine's Bluetooth ON/OFF switch and switch it to the ON position.
• For more Voice Control options, say "help" for a list of basic commands.
Note!
Your LionChief Plus 2.0 locomotive can receive commands from both a Bluetooth
and a TMCC controller at the same time. You may disable Bluetooth control if
desired by moving the Bluetooth ON/OFF switch to the OFF position. Refer to
Figure 6 on page 8.
22
Advertisement
Table of Contents
