Lionel 7-11000 Owner's Manual page 11

Operating your train
The wireless controller
T
urn the power switch on the side of the wireless controller to the up or ON position. The
red LED at the top of the speed dial will illuminate to tell you the controller is on.
Turn the power switch on the wireless controller to the down or OFF position when not in
use. The LED at the top of the dial will go out to indicate the power is off. See Figure 7.
Leaving the wireless controller power ON when not in use will drain the controller's
Note!
battery.
Figure 7. Using the wireless controller
Pairing the wireless controller to your Ready-to-Play
W
ith the wireless controller turned off, turn the locomotive power switch to the "ON"
position. The locomotive will produce a loud beeping sound, while the headlight will be
off, and the cab light is blinking on and off.
Turn the wireless controller on. The locomotive sounds will turn on, the headlight will
illuminate, and the cab light will turn off as long as the train is stopped (at idle).
If the controller is turned on PRIOR to the locomotive, the LED on the remote will
Note!
blink on and off. Once the remote pairs with the locomotive, the LED on the
controller will turn solid if the position of the dial is in the neutral/idle position
and the knob is facing up. The locomotive sounds will come alive as described
above.
Power on light
ON
3 BUTTON WIRELESS CONTROLLER
11
OFF
train set
TM