Table of Contents
Advertisement
Using the Bluetooth LionChief App
Switching Connection Between Multiple Bluetooth
Y
our LionChief app will display all "available" locomotives in the engine selection
carousel. If you have three or more available engines, touch and scroll right to view them.
Switching between available locomotives is easy, press the un-link icon to release the currently
connected engine. Alternately, you can highlight the engine you would like to run and press
the Link icon to connect. In both cases, if the previously selected locomotive was in motion, it
will stop when disconnected.
Figure 14. Switching between three locomotives
Troubleshooting
• If the locomotive does not appear in the App's "engine selection carousel," try turning the
track power off, wait 5 seconds and turn it back on. If that still doesn't work, try restarting
the app on your device.
• If a universal remote is present and powered on, make sure one of its 3 channels is not
connecting to your locomotive before the app is able to connect.
• Make sure that your smart device's Bluetooth is turned on. This is done outside of the
LionChief app.
Note!
Your Legacy locomotive can receive commands from both a Bluetooth and Legacy
device at the same time.
Available Engines: 3
CONNECTED LOCOMOTIVE'S NAME AND
FEATURES
25
Locomotives
®
Un-link
Link
Advertisement
Table of Contents
