Page 1
71-9554-250 3/00 LIONEL AUTOMATIC UNLOADING CAR WITH PLATFORM...
Page 2
This car operates best at about 10-12 volts A.C. How to install Unloading Platform he unloading platform provided with the Lionel Automatic Unloading Car must be installed next to the remote control section. Insert the controller through the opening in the base of the platform so that controller cable runs under the platform and the remote control section rests on the platform base and in the front of the platform.
Page 3
Figure 2 - After inserting floor, bend down tabs as shown. Operating the Car set of miniature cans are included. Load the cans through an opening in the roof of the car shown in figure 1. They can go into the opening in only one way-with the top of the can toward the center of the car.
Page 4
Website @ www.Lionel.com consumer-purchaser, for one year against original If you prefer to send it back to Lionel L.L.C. for defects in materials or workmanship when pur- factory repair, you must first call 810-949-4100 or chased through an authorized Lionel merchant.
Need help?
Do you have a question about the 71-9554-250 and is the answer not in the manual?
Questions and answers