The following fault message appears in the display and the
programme has been cancelled
Problem
Check inlet See
Check drain See
Call service Wa-
terproof syst.
Call service Fault
F
To switch off the fault messages: Switch the washing machine off with the but‐
ton.
Possible cause and remedy
The water inlet is blocked or restricted.
Check whether the tap is turned on properly.
Check whether the inlet hose is kinked.
Check whether there is sufficient water pressure.
The filter in the water inlet is blocked.
Clean the filter.
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
Clean the filters and the drain pump.
The maximum drain height is 1 m.
The water protection system has reacted.
Turn off the tap.
Call Miele.
There is a fault.
Start the programme again. If the fault message
appears again, contact Miele.
Problem solving guide
63