Opening The Settings Menu; Settings For Ultraphase 1 And Ultraphase 2 - Miele TX2070 Operating Instructions Manual

TwinDos

Opening the Settings menu

You have to enter the type of deter‐
gent being used in the Settings menu.
 Switch on the washing machine and
wait until the standard display lights
up.
2:59



 Touch the  and  sensors at the
same time until the following appears
in the display:
Language 
The "Settings" menu has been opened.
 Touch the  sensor until the follow‐
ing appears in the display:
Dispensing unit
 Touch the OK sensor.
Deterg. type/amount
 Touch the OK sensor.
22
1600

OK 


Settings for UltraPhase 1 and
UltraPhase 2
The dosage amounts for UltraPhase 1
and UltraPhase 2 are preset for hard‐
ness range II ().
Container 1
 Touch the OK sensor.
No entry
 Use the  or  sensor to select
UltraPhase 1 and confirm your choice
with the OK sensor.
Dosage amount

Useful tip: If you live in an area with
water hardness levels I () or III (),
adjust the dosage for Miele products
according to the information given on
the packaging.
 Use the OK sensor to confirm the

dosage amount or use the  and 
sensors to change the amount.
The washing machine will automatically
assign UltraPhase 2 to compartment 2.

You just need to confirm or change the
dosage amount.
Dosage amount
 Use the OK sensor to confirm the
dosage amount or use the  and 
sensors to change the amount.



48 ml
36 ml