Water Plus; Water Plus Level; Maximum Rinse Level; Suds Cooling - Miele TX2070 Operating Instructions Manual

Settings

Water plus

You can increase the amount of water
delivered in the wash programmes.
Options
– Water +
The water level is increased in the
wash and rinse stages.
– Extra rinse
An extra rinse is carried out.
– Water + and Extra rinse
The water level is increased in the
wash and rinse stages and an extra
rinse is carried out.

Water plus level

There are four different water levels
which can be selected with Water
plus.
Level:
– Normal (Factory default setting)
– Plus 
– Plus 
– Plus 
94

Maximum rinse level

The water level in the rinse cycle can
be permanently set to the highest val‐
ue.
This function is useful for allergy suffer‐
ers as it achieves an excellent rinse re‐
sult. Water consumption will increase.
Factory default setting: the maximum
rinse level setting is switched off.

Suds cooling

When this is activated, additional wa‐
ter flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic drainage
pipes.
Suds cooling takes place when a Cot‐
tons programme with a temperature of
70°C or higher is selected.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where the drainage pipes do not
comply with DIN 1986.
Factory default setting: Suds cooling is
switched off.