The Following Fault Message Appears In The Display And The Programme Has Been Cancelled - Miele WMR 861 WPS Operating Instructions Manual

The following fault message appears in the display and the
programme has been cancelled
Message

Drain fault
Clean the drain filter
and the pump.
Check the drain
hose

Water intake fault
Turn on the tap

Technical fault F
If restart is
unsuccessful, call
Miele.

Waterproof system
reacted
Turn off the tap. Call
Miele.
To switch off the fault messages: Switch the washing machine off with the 
button.
Possible cause and remedy
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
 Clean the filters and the pumps.
 The maximum drain height is 1 m.
The water inlet is blocked or restricted.
 Check whether the tap is turned on properly.
 Check whether the inlet hose is kinked.
 Check whether there is sufficient water pressure.
The filter in the water inlet is blocked.
 Clean the filter.
There is a fault.
 Disconnect the washing machine from the mains
electricity supply, either by switching off at the wall
socket and withdrawing the plug, or by
disconnecting it at the circuit breaker.
 Wait at least 2 minutes before reconnecting the
washing machine to the mains electricity supply.
 Then switch the washing machine on again.
 Start the programme again.
If the fault message appears again, contact Miele.
The water protection system has reacted.
 Turn off the tap.
 Call Miele.
Problem solving guide
71