Changing the programme sequence
Cancelling a programme
You can cancel a programme at any
time after it has started.
Press the Start/Stop button.
The following will appear in the display:
Cancel programme
Touch the OK sensor.
The suds will be pumped away. The fol‐
lowing will appear in the display:
Prog. cancelled
Pull open the door.
Remove the laundry.
If you want to select a different pro‐
gramme:
Close the door.
Select the programme you want.
Add detergent to the detergent dis‐
penser drawer, if necessary.
Press the Start/Stop button.
The new programme will begin.
Interrupting a programme
Switch the washing machine off with
the button.
Switch the washing machine back on
with the button to continue with
the same programme.
50
Changing a programme and
settings
Programme
After the start of a programme, it is no
longer possible to select a different pro‐
gramme.
Temperature
The temperature can be changed within
the first five minutes, except in the Cot‐
tons programme.
Press the Temperature button.
Use the , and OK sensors to
change the temperature.
Spin speed
Once a programme has started, you
can change the spin speed up until the
final spin begins.
Press the Spin speed button.
Use the , and OK sensors to
change the spin speed.
Extra options
It is possible to select or deselect the
Short and Water plus Extra options up
to five minutes after the programme has
started.
Useful tip: It is not possible to make
any changes to the programme or to
cancel it if the safety lock has been ac‐
tivated.