The Following Fault Message Appears In The Display And The Programme Has Been Cancelled - Miele SUPERTRONIC Operating Instructions Manual

The following fault message appears in the display and the
programme has been cancelled.
Fault message
Water inlet
2
fault
Drain fault
2
Waterproof
L
system has
reacted
Technical fault
;
F xxx
To switch off the fault message: Switch the machine off with the K button.
1)
Possible cause
The water inlet is
blocked or
restricted.
– The water outlet is
blocked or
restricted.
– The drain hose
has been fixed
too high.
The water protection
system has reacted.
There is a fault.
Problem solving guide
Remedy
Check whether
– the tap has been turned on
properly.
– the inlet hose is kinked.
– the water pressure is too low.
– Clean the drain filter and
drain pump.
– The maximum drain height is
1m.
– Turn off the tap.
– Call Miele.
Start the programme again.
If the fault message appears
again, contact Miele.
1)
61