The Following Fault Message Appears In The Display And The Programme Has Been Cancelled - Miele W 1913 Operating Instructions Manual

Problem solving guide
The following fault message appears in the display and the
programme has been cancelled.
Fault message
Drain
fault
;
Water inlet
fault
;
Waterproof
fault
;
Technical
fault
;
A To switch off the fault message: Switch the machine off with the _ button.
36
Possible cause
– The water outlet is
blocked or restricted.
– The drain hose has
been fixed too high.
The water inlet is blocked
or restricted.
The water protection
system has reacted.
There is a fault.
Remedy A
– Clean the fluff filter and
drain pump.
– The maximum drain height
is 1 m.
Check whether
– the tap has been opened
properly.
– the inlet hose is kinked.
– the water pressure is too
low.
– Close the tap.
– Call Miele.
Start the programme again.
If the fault message appears
again, contact Miele.