The Following Fault Message Appears In The Display And The Programme Has Been Cancelled - Miele WKH 130 WPS Operating Instructions Manual

Problem solving guide
The following fault message appears in the display and the
programme has been cancelled
Problem

Check inlet See 

Check drain See 

Call service 
Waterproof syst.

Call service  Fault
F
To switch off the fault messages: Switch the washing machine off with the 
button.
64
Possible cause and remedy
The water inlet is blocked or restricted.
 Check whether the tap is turned on properly.
 Check whether the inlet hose is kinked.
 Check whether there is sufficient water pressure.
The filter in the water inlet is blocked.
 Clean the filter.
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
 Clean the filters and the drain pump.
 The maximum drain height is 1 m.
The water protection system has reacted.
 Turn off the tap.
 Call Miele.
There is a fault.
 Start the programme again. If the fault message
appears again, contact Miele.