Starting The Programme - The End Of The Programme - Miele TX2070 Operating Instructions Manual

6. Starting the programme - the end of the programme

Starting the programme
 Press the flashing Start/Stop button.
The door will lock ( will appear in the
display to show this) and the pro‐
gramme will start.
If a Delay start time has been selected,
then this will count down in the display.
At the end of the Delay start time or im‐
mediately after the programme has
started (if no Delay start time has been
selected), the programme duration will
appear in the display.
The programme sequence is also
shown in the display. The washing ma‐
chine lets you know which section of
the programme has been reached.
At the end of the programme
The door is still locked during the Anti-
crease phase and the following will ap‐
pear alternately in the display:
Anti-crease/Finish
and
 Press Start/Stop
 Press the Start/Stop button. This will
unlock the door.
 Pull open the door.
 Remove the laundry.
Check that all items have been re‐
moved from the drum. Items left in
the drum could discolour other items
in the next wash or become discol‐
oured themselves.
36
 Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
 Switch the washing machine off with
the  button.
 Close the door. Otherwise there is a
danger of objects being placed inad‐
vertently in the drum. If these re‐
mained unnoticed and were washed
in the next load, they could damage
the laundry. An open door is also a
danger to pets and children.
 If applicable, remove the used capsu‐
le from the detergent dispensing
drawer.