Ecofeedback - Miele TX2070 Operating Instructions Manual

Washing environmentally and economically

EcoFeedback

You can call up information about the
energy and water consumption of your
washing machine with the EcoFeed‐
back sensor.
The following information will appear in
the display:
– An estimate of the consumption be‐
fore the programme begins.
– The energy and water consumption
used thus far in a current pro‐
gramme.
– The energy and water consumption
of the programme which has just fin‐
ished.
1. Estimate
 After selecting a programme, touch
the EcoFeedback sensor.
The estimated energy consumption lev‐
els will be displayed as a bar chart.
Energy          
 Touch the  or  sensor to change
to the estimated water consumption
levels.
Water          
The more bars () visible, the higher the
energy or water consumption.
The estimate will vary depending on the
wash programme, temperature and any
Extra options selected.
The display will change automatically or
you can return to the standard display
by touching the OK sensor.
26
2. Actual consumption
Useful tip: At the end of the pro‐
gramme, before opening the door, you
can view the actual amount of energy
and water used by the programme
which has just been run.
 Touch the EcoFeedback sensor.
Energy
 Touch the  or  sensor to switch to
the water consumption display.
If the door is opened or the washing
machine has switched off automati‐
cally at the end of the programme,
the data will revert to the estimated
consumption.
Total consumption setting
– This setting gives a total of the ener‐
gy consumption and water consump‐
tion to date.
See "Settings".



0.9 kWh