Installing A Hard Drive - HP ProLiant ML110 G7 Maintenance And Service Manual

Remove the hard drive.
3.
WARNING:
carrier at a time.

Installing a hard drive

The server supports up to four non-hot-plug SATA hard drives, four LFF hot-plug SAS hard drives, and eight
SFF SAS hot-plug hard drives.
CAUTION:
all bays are populated with either a component or a blank.
IMPORTANT:
optional controller is installed in the server.
IMPORTANT:
number.
Remove the front bezel
1.
Remove the existing hard drive blank
2.
To reduce the risk of injury from electric shock, do not remove more than one drive
To prevent improper cooling and thermal damage, do not operate the server unless
Hot-plug capability and drive LED support are only available when a supported
If only one hard drive is installed, install it in the bay with the lowest device
("Removing the front
("Removing a hard drive
bezel" on page 25).
blank" on page 29).
Removal and replacement procedures 31