Bbwc Procedures; Removing The Bbwc Module - HP ProLiant ML110 G7 Maintenance And Service Manual

Install the expansion board.
6.
Connect any required internal or external cables to the expansion board. See the documentation that
7.
ships with the expansion board.
Install the full-length expansion board retainer, if any full-length expansion boards were removed
8.
("Installing the full-length expansion board
Install the air baffle
9.
Install the access panel
10.

BBWC procedures

•
Removing and replacing failed components:
Removing the BBWC module (on page 46)
o
Removing the battery pack
o
Installing the BBWC module
o
•
Recovering cached data from a failed server
on page 51)
CAUTION:
Detaching the cable causes any unsaved data in the cache module to be lost.

Removing the BBWC module

Power off the server
1.
Remove the access panel
2.
Remove the air baffle.
3.
Remove the expansion board
4.
("Installing the air baffle" on page 27).
("Installing the access
("Removing the BBWC battery
("Installing the BBWC battery pack and cache
Do not detach the cable that connects the battery pack to the cache module.
("Power down the server" on page 23).
("Removing the access
("Installing an expansion
retainer" on page 44).
panel" on page 24).
pack" on page 47)
("Recovering data from the battery-backed write
panel" on page 24).
board" on page 45).
Removal and replacement procedures 46
module" on page 48)
cache"