Sony HCD-M333 Service Manual page 29

QQ
3 7 63 1515 0
4. CD Ship Mode (Setting the Position for Transportation)
Press the ?/1 button to turn the power on.
1.
2. Press the FUNCTION to change the function to "CD".
3. Press two buttons x , ENTER/START and press the CD u button simultaneously.
4. The CD mechanism goes to the transportation mode.
5. When "LOCK" is displayed, disconnect the power cord.
6. The lock is released when the power turns on next.
5. Ship Mode (Setting the Position for Transportation)
This mode is the combination of CD SHIP mode and Cold reset.
In this mode, the MD reset is not activated.
Press the ?/1 button to turn the power on.
1.
2. Press three buttons x , ENTER/START and press the MD u button simultaneously.
3. When "LOCK" is displayed, disconnect the power cord.
4. The lock is released when the power turns on next.
6. Disc Tray Lock
The disc tray lock function for the antitheft of a demonstration disc in the store is equipped.
Procedure:
Press the ?/1 button to turn the set on.
1.
2. Select the function "CD".
3. A disc is put in and a tray is closed.
Press two buttons of x and Z (CD) simultaneously for five seconds.
4.
5. The message "LOCKED" is displayed and the tray is locked. (Even if turning power on/off, the tray is still locked.)
6. Press two buttons of x and Z (CD) simultaneously for five seconds again.
7. The message "UNLOCKED" is displayed and the tray is unlocked.
7. Repeat 5 Times Limit Release Mode
5 times limit of repeating TAPE, MD or CD is released.
Procedure:
Press the ?/1 button to turn the set on.
1.
TE
L 13942296513
Press three buttons x , REC MODE and Z (CD) simultaneously.
2.
3. The message "LIMIT OFF" is displayed, and repeat 5 times limit is released.
4. To exit from this mode, disconnect the power cord.
www
.
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Q Q
3 6 7 1 3 1 5
co
.
HCD-M333
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9
29