Hide thumbs Also See for HCD-MC1:

Advertisement

SERVICE MANUAL
• This set is the tuner, deck, CD
and amplifier section in MHC-MC1.
Manufactured under license from Dolby Laboratories
Licensing Corporation.
"DOLBY" and the double-D symbol a are trademarks
of Dolby Laboratories Licensing Corporation.
Amplifier section
U.S.A models:
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 8 Ω loads both channels driven, from 70 – 20,000 Hz; rated 80 W per
channel minimum RMS power, with no more than 0.9% toral harmonic
distortion from 250 mW to read output.
Continuous RMS power output
80 + 80 W(8Ω at 1kHz, 10% THD)
Tortal harmonic distortion
less than 0.09%(8Ω at 1kHz, 40W)
Inputs
VIDEO/MD IN (phono jack):
voltage 250mV/450mV,
impedance 47kΩ
Outputs
VIDEO/MD OUT (phono jack):
voltage 250mV,
impedance 1kΩ
PHONES (stereo phone jacks):
accepts headphones of 8Ω or more
SPEAKER : accepts impedance of 8 to 16Ω
REAR SPEAKER :
accepts impedance of 16Ω
SUPER WOOFER :
Voltage 1V, impedance 1kΩ
CD player section
System
Compact disc and digital audio system
Laser
Semiconductor laser (λ =780mm)
Emission duration:
continuous
MICROFILM
HCD-MC1
Model Name Using Similar Mechanism HCD-F150/FR10
CD
CD Mechanism Type
Section
Optical Pick-up Name
Model Name Using Similar Mechanism HCD-DR8AV
Tape deck
Section
Tape Transport Mechanism Type
SPECIFICATIONS
Laser output
Frequency response
Wavelength
Signal-to-noise retio
Dynamic range
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Output Level
Tape player section
Recording system
Frequency response (DOLBY NR OFF)
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
Antenna
Antenna terminals
Intermediate frequency 10.7MHz
MINI HI-FI COMPONENT SYSTEM
US Model
E Model
CDM-46B1
KSS-213BA/F-NP
TCM-230AWR2/230PWR2
Max. 44.6µW*
*This output is the value measured at a distance of
200 mm from the objective lens surface on the
Optical Pick-up Block with 7 mm aperture.
2Hz – 20kHz (±0.5dB)
780 – 790nm
More than 90dB
More than 90dB
–18dBm
4-track 2-channel stereo
40 – 13,000Hz (±3dB),
using Sony TYPE I
cassette
40 – 14,000Hz (±3dB),
using Sony TYPE II
cassette
87.5 – 108.0MHz
FM lead antenna
75Ω unbalanced
— Continued on next page —

Advertisement

Table of Contents
loading

Summary of Contents for Sony HCD-MC1

  • Page 1 4-track 2-channel stereo VIDEO/MD IN (phono jack): Frequency response (DOLBY NR OFF) voltage 250mV/450mV, 40 – 13,000Hz (±3dB), impedance 47kΩ using Sony TYPE I Outputs cassette VIDEO/MD OUT (phono jack): 40 – 14,000Hz (±3dB), voltage 250mV, using Sony TYPE II impedance 1kΩ...
  • Page 2: Schematic Diagram

    HCD-MC1 6-4. SCHEMATIC DIAGRAM BD SECTION • See page 71 for Waveforms. • See page 72 for IC Pin Functions. BA/F-NP 1SS133T The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
  • Page 3: Cd Motor Section

    HCD-MC1 6-6. SCHEMATIC DIAGRAM CD MOTOR SECTION — 41 — — 42 —...
  • Page 4: Audio Section

    HCD-MC1 6-8. SCHEMATIC DIAGRAM AUDIO SECTION • See page 80 for IC Block Diagrams. MAIN BOARD CN106 (Page 55) 0.01 The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
  • Page 5: Leaf Sw Section

    HCD-MC1 6-10. SCHEMATIC DIAGRAM LEAF SW SECTION MAIN BOARD CN107 (Page 55) — 49 — — 50 —...
  • Page 6: Main (1/5) Section

    HCD-MC1 6-12. SCHEMATIC DIARGAM MAIN (1/5) SECTION EQUALIZER MICRO PROC. INTERFACE POWER AMP FM/AM TUNER UNIT IS SUPPLIED AS THE ASSEMBLED BLOCK (DECK A) — 53 — — 54 —...
  • Page 7: Main (2/5) Section

    HCD-MC1 6-13. SCHEMATIC DIARGAM MAIN (2/5) SECTION • See page 51 for Printed Wiring Board. • See page 71 for Waveforms. • See page 77 for IC Pin Functions. E MODEL 0.01µF BN1F4M 2SA115 BN1F4M BN1F4M PB (DECK A) ]: PB (DECK B) <...
  • Page 8: Main (3/5) Section

    HCD-MC1 6-14. SCHEMATIC DIARGAM MAIN (3/5) SECTION • See page 51 for Printed Wiring Board. • See page 71 for Waveforms. • See page 56 for IC Pin Functions. (CD DOOR) 0.33 0.01uF — 57 — — 58 —...
  • Page 9: Main (4/5) Section

    HCD-MC1 6-15. SCHEMATIC DIARGAM MAIN (4/5) SECTION • See page 51 for Printed Wiring Board. • See page 80 for IC Block Diagrams. POWER AMP BN1F4M BN1F4M 0.01uF 0.01uF The components identified by mark ! or dotted line with mark ! are critical for safety.
  • Page 10: Main (5/5) Section

    HCD-MC1 6-16. SCHEMATIC DIARGAM MAIN (5/5) SECTION • See page 51 for Printed Wiring Board. 2SB1375 BN1A4M 1375 2200 — 61 — — 62 —...
  • Page 11: Panel Section

    HCD-MC1 6-18. SCHEMATIC DIAGRAM PANEL SECTION • See page 80 for IC Block Diagrams. • See page 71 for Waveforms. • See page 79 for IC Pin Function Description. R652 — 65 — — 66 —...
  • Page 12: Power Section

    HCD-MC1 6-20. SCHEMATIC DIAGRAM POWER SECTION US MODEL VOLTAGE CHANGE S991 E MODEL E MODEL 250V US MODEL US MODEL The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified.
  • Page 13: Ic Block Diagrams

    6-23. IC BLOCK DIAGRAMS IC603 (PANEL BOARD) BA3833F-E2 IC461 (MAIN BOARD) BA6780 RESET RESET 18 RESET VIN1 VIN2 REFFERENCE PREF 17 f01 CURRENT FIN1 FIN2 LINE 16 f02 RIN1 RIN2 LINE 15 f03 IOUT BIAS 13 f VREF Bias 12 VCC FBIN- VREG 11 NC...

Table of Contents