4
Example of Application
4.1 Example of application for a contour trace
4.1
Example of application for a contour trace
DXF file
4-32
Start the CAD Reader
You can start the CAD Reader program by double clicking this button.
Open the DXF file
Click the Open button to select a CAD drawing. The following screen
appears, e.g. on the PC
CAD drawing of a shaft
Layer selection
The DXF file contains several layers which are all displayed via the
Layer Selection screen. "Deselect All" deselects the existing
•
layer "1" and
•
layer "0".
Select layer "1" and confirm with "OK".
Redraw
With Redraw you size the selected sub-area of the drawing to match
the window and display it again in optimized form.
SINUMERIK 840D/840Di/810D/ Operator's Guide CAD Reader (CAD) – 03.02 Edition
4
03.02
Siemens AG, 2002. All rights reserved