Additional Settings And Displays - Siemens SINUMERIK 840Di Operator's Manual

3
Additional Settings

3.1 Additional settings and displays

3.1 Additional settings and displays
Edit
View → → → → Status Line
Settings
3-28
The global "Edit" menu contains alternative commands to the toolbar
such as Set Contour Points/Drill Points, Select Layers, Rotate Contour
or Set Zero Point.
You can show the status line by selecting "View → View Status Line".
The coordinates of the axis names (X, Y) and the target system
(standard) are displayed in the status line.
Select contour trace or drill point
Choose whether to accept contours or select drill points.
Contour trace → → → → element or intersection
This function applies to the contour trace and undo.
Element: All intersections in the current element are
included and displayed.
Intersection: Only the next intersection in each case is
displayed.
Auto Zoom
When selection options are chosen for the contour trace, the elements
included in the selection are automatically zoomed in each case.
SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition
3
03.02
 Siemens AG, 2002. All rights reserved