Download  Print this page

Formats; Plane Generation - Siemens SINUMERIK 840Di Operator's Manual

Cad reader manual.
Hide thumbs

Advertisement

1
Introduction
1.2 General function

1.2.3 Formats

1.2.4 Plane generation

1-18
Input format
Basic input format:
DXF input formats as defined by AUTOCAD
Output formats
After conversion, NC programs can be saved as file types
MPF
SPF
ARC.
When a file is saved, the CAD Reader creates G code (NC blocks)
from the selected contour. This code can be processed directly with
the SINUMERIK.
Comment blocks which can be processed by the geometry processor
or the cycles support are saved at the same time.
Imported contours can be recompiled or modified by means of the
geometry processor.
Drill holes are generally generated in cycles format and can thus be
recompiled on the control.
Generation of relevant data
When the relevant data are saved as part program blocks, they are
converted to MPF format by the geometry processor and the
appropriate planes G17, G18, G19 are generated.
Notes
Technology data are not specified in the CAD Reader, but must
generally be programmed in the editor or the geometry processor.
NC milling programs are created only in the 2D machining plane.
The infeed axis must be programmed later.
SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition
DXF (Drawing eXchange Format)
®
are supported.
© Siemens AG, 2002. All rights reserved
1
03.02

Advertisement

This manual also for:

Sinumerik 810dSinumerik 840d

Comments to this Manuals

Symbols: 0
Latest comments: