Ieee C37.118 Message Framework - ABB Relion 670 Series RES670 Technical Manual

Section 6
Wide area measurement system
6.1.3.1
102
that PMUREPORT instance. Whereas, for UDP clients, the PMUREPORT instance for
each UDP channel is defined by the user in the PMU and the client has to know the PMU
ID corresponding to that instance in order to be able to communicate. More information
is available in the sections
use of UDP.
RES670
PMUREPORT: 1 PMUREPORT: 2
IEC140000117 V1 EN
Figure 29: The communication configuration (PMUCONF) structure in RES670

IEEE C37.118 Message Framework

Four message types are defined in IEEE C37.118 standard: data, configuration, header,
and command frames. The first three message types are transmitted from the PMU/PDC
that serves as the data source, and the last one (command frame) is received by the PMU/
PDC.
These four message types are defined in IEEE C37.118 standard as follows:
Short guidance for the use of TCP
PMU ID: X
TCP IP
PMU ID: Y
TCP Port
PMUREPORT Instance: 1 or 2
UDP 1
PMUREPORT Instance: 1 or 2
UDP 2
PMUREPORT Instance: 1 or 2
UDP 3
PMUREPORT Instance: 1 or 2
UDP 4
PMUREPORT Instance: 1 or 2
UDP 5
PMUREPORT Instance: 1 or 2
UDP 6
1MRK 511 365-UUS A
and Short guidance for the
1344/C37.118
TCP Client_1
1344/C37.118
TCP Client_2
1344/C37.118
TCP Client_3
1344/C37.118
TCP Client_4
1344/C37.118 TCP Client_5
1344/C37.118 TCP Client_6
1344/C37.118 TCP Client_7
1344/C37.118 TCP Client_8
PMU ID
1344/C37.118
UDP Client Group_1
Unicast/Multicast
1344/C37.118
UDP Client Group_2
Unicast/Multicast
1344/C37.118
UDP Client Group_3
Unicast/Multicast
1344/C37.118
UDP Client Group_4
Unicast/Multicast
1344/C37.118
UDP Client Group_5
Unicast/Multicast
1344/C37.118
UDP Client Group_6
Unicast/Multicast
IEC140000117-1.en.vsd
Phasor measurement unit RES670 2.1 ANSI
Technical manual
PMU ID