Wiring; Wiring And Block Diagram - Siemens SIMATIC ET 200SP Manual

Wiring

3.1

Wiring and block diagram

This section includes the block diagram of the DQ 4x24VDC/2A HF module with the terminal
assignments for a 1-wire, 2-wire and 3-wire connection. You can use and combine the
different wiring options for all channels.
You can find information on wiring the BaseUnits in the system manual Distributed
I/O System ET 200SP (http://support.automation.siemens.com/WW/view/en/58649293).
Note
• The load group of the module must begin with a light-colored BaseUnit. Keep this in mind
also during the configuration.
Note
Cross circuit at output
Be aware that voltage from a cross-circuit at the output can feed L+ to modules.
11
Digital output module DQ 4x24VDC/2A HF (6ES7132-6BF20-0CA0)
3
Manual, 12/2015, A5E32855695-AC