Wiring: 3-wire connection of actuators
The following figure shows an example of the terminal assignment of the digital output
module DQ 4×24VDC/2A HF on the BaseUnit BU type A0 with AUX terminals (3-wire
connection).
①
3-wire connection
②
Color-coded labels with color codes CC02 and
CC71 (optional)
③
Filter connection supply voltage (only when
light-colored BaseUnit is present)
DQ
Output signal, channel n
n
Image 3-2
Terminal assignment for 3-wire connection of actuators
Digital output module DQ 4x24VDC/2A HF (6ES7132-6BF20-0CA0)
Manual, 12/2015, A5E32855695-AC
1 A to 10 A
AUX terminals
PE (AUX)
Protective conductor connection
24 V DC
Supply voltage L+ (infeed for light-colored
BaseUnit only)
M
Ground
P1, P2, AUX
Internal self-assembling voltage buses
Connection to left (dark-colored BaseUnit)
Connection to left interrupted (light-colored
BaseUnit)
3.1 Wiring and block diagram
Wiring
13