Siemens SIMATIC ET 200SP Manual page 10

Product overview
2.1 Properties
Properties
The module has the following technical properties:
● Digital output module with 4 outputs
● Source output (PNP, P-switching)
● Supply voltage L+
● Output current 2 A (per channel)
● Configurable diagnostics (per channel)
● Configurable substitute values (per channel)
● Suitable for solenoid valves, DC contactors, and indicator lights
● Safety-related shutdown
The module supports the following functions:
● Firmware update
● I&M identification data
● Configuration in RUN
● PROFIenergy
● Value status
● Isochronous mode
● Module-internal Shared Output (MSO)
Table 2- 1
Configurable submodules/
submodules for shared device
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
Accessories
The following accessories are supplied with the module and can also be ordered separately
as spare parts:
● Labeling strips
● Color identification labels
● Reference identification label
● Shield connector
See also
You can find additional information on the accessories in the system manualET 200SP
distributed I/O system (https://support.industry.siemens.com/cs/ww/en/view/91696622).
10
Version dependencies of other module functions
Product version of the module
Function
as of
1
Digital output module DQ 4x24VDC/2A HF (6ES7132-6BF20-0CA0)
Firmware version of the module
as of
V2.0.0
Manual, 12/2015, A5E32855695-AC