Siemens 7SR12 Argus Manual page 105

Instrument
V Phase AB Demand
Max
Min
Mean
V Phase BC Demand
Max
Min
Mean
V Phase CA Demand
Max
Min
Mean
Power P 3P Demand
Max
Min
Mean
Power Q 3P Demand
Max
Min
Mean
Power S 3P Demand
Max
Min
Mean
Frequency Demand
Max
Min
Mean
MISCELLANEOUS METERS
→to view
Start Alarm
Count
Target
Date
Time
Waveform Recs
Fault Recs
Event Recs
Data Log Recs
Setting Group
BINARY INPUT METERS
→to view
BI 1-6
BINARY OUTPUT METERS
→to view
BO 1-8
VIRTUAL METERS
→to view
V 1-8
©2017 Siemens Protection Devices Limited
Displays the Voltage demand based on Vab.
0.00V
0.00V
0.00V
Displays the Voltage demand based on Vbc.
0.00V
0.00V
0.00V
Displays the Voltage demand based on Vca.
0.00V
0.00V
0.00V
Displays the Active Power demand.
0.00W
0.00W
0.00W
Displays the Reactive Power demand.
0.00VAr
0.00VAr
0.00VAr
Displays the Apparent Power demand.
0.00VA
0.00VA
0.00VA
Displays the Frequency demand.
0.000Hz
0.000Hz
0.000Hz
This is the sub-group that includes indication such as the relays
time and date, the amount of fault and waveform records stored in
the relay TEST/RESET ► allows access to this sub-group
Count of configurable type of Relay starts
0
100
01/01/2000
This meter displays the date and time and the number of Fault
22:41:44
records and Event records stored in the relay
0
0
0
0
1
This is the sub-group that includes all the meters that are
associated with the Binary inputs TEST/RESET ► allows access
to this sub-group
Displays the state of DC binary inputs 1 to 6 (The number of binary
---- --
inputs may vary depending on model)
This is the sub-group that includes all the meters that are
associated with the Binary Outputs TEST/RESET ► allows access
to this sub-group
Displays the state of DC binary Outputs 1 to 8. (The number of
---- ----
binary outputs may vary depending on model)
This is the sub-group that shows the state of the virtual status
inputs in the relay TEST/RESET ► allows access to this sub-
group
Displays the state of Virtual Outputs 1 to 8 (The number of virtual
---- ----
7SR11 & 7SR12 Settings & Instruments Guide
Description
Chapter 2 Page 13 of 20