11 Optional Cables; M5300/M7300 Option Cable Ca-012349-001; Figure 11-1: M5300/M7300 Option Cable Ca-012349-001 - Harris M7300 Installation And Product Safety Manual

MM-014763-001, Rev. E

11 OPTIONAL CABLES

11.1 M5300/M7300 OPTION CABLE CA-012349-001

M5300/M7300 Option Cable CA-012349-001 connects to the 44-pin I/O connector on the rear of the
radio. It breaks out into several smaller standardized connectors, allowing straightforward access to
external I/O interfaces provided by the radio. The cable also shortens radio removal and re-installation
time when required. The cable is shown in Figure 11-1 below. The cable's 44-pin D-subminiature
connector that mates with the connector on the rear of the radio is identified P1.
P2, the cable's 2-pin connector, provides connections for an external speaker in a front-mount M7300
mobile radio installation. See Section 9.1 (page 64) for connection instructions. P2 is not used in a
remote-mount radio installation. In a remote-mount radio installation, the audio amplifier in the CH-721
control head drives the external speaker. In this case, the speaker connection is made at the rear of the
control head.
P1
(Pin-Out
View)
P1
(Side
View)
P1
66
ASSEMBLY DIAGRAM
Approximately 66 inches
(170 centimeters)
WIRING DIAGRAM
(Made From PS-CA-012349 Rev. B)

Figure 11-1: M5300/M7300 Option Cable CA-012349-001

P1
P6
P2
P3
P5
P4