Figure 8-3: Mounting Bracket Fm103111V1 Dimensions [For Remote-Mount M7300 Mobile Radio (Radio Not Shown)] - Harris M7300 Installation And Product Safety Manual

5. Install and tighten the mounting screws/hardware.
6. Verify the bracket is firmly secured to the mounting surface. A secure mount prevents unreasonable
vibration, which could damage the radio and/or cause its cable connections to loosen.
Figure 8-3: Mounting Bracket FM103111V1 Dimensions
[for Remote-Mount M7300 Mobile Radio (Radio Not Shown)]
TOP VIEW
(Dimensions in Inches)
FRONT VIEW
(Dimensions in Inches)
(Made From FM103111 Rev. B)
MM-014763-001, Rev. E
SIDE VIEW
Rear of Bracket
Bracket-To-Radio
Screw Holes
(6 places,
3 each side)
Bracket-To-Vehicle
Screw Holes
(4 places)
Front of Bracket
47