15 Complete The Installation - Harris M7300 Installation And Product Safety Manual

MM-014763-001, Rev. E

15 COMPLETE THE INSTALLATION

Double-check the following items before considering the installation completed:

Verify all newly installed mechanical hardware is mounted securely and all respective mounting
hardware is tight.

Verify all electrical interconnections are connected properly and the associated connector attachment
hardware is tight. Pay special attention to all RF antenna cables!

Verify all related fuses are correctly installed and properly rated.

Verify all electrical cables and wiring are tied, stowed, and protected so they are out of the way of
casual contact, away from sources of extreme heat, and wire chafing cannot occur. Pay special
attention to all RF antenna cables!

To prevent fumes from entering the vehicle's passenger compartment, seal the hole/grommet/wire
combination at the firewall with a silicon-based sealer.

Verify all vehicle components are properly reinstalled such as kick panels, headliners, and seats.

If the installation includes a separately-mounted on/off power switch for manually turning the radio
(and possibly others systems) on and off, verify it is labelled accordingly. For example: "Radio
ON/OFF."

Remove all tools and unused hardware from the vehicle.

Verify the test performance data has been recorded on the data collection form shown in this manual.
82