Material Inspection - Harris M7300 Installation And Product Safety Manual

MM-014763-001, Rev. E
Table 4-5: Additional Options and Accessories for M7300 Mobile Radios
PART NUMBER
AN-025167-015
AN-025187-001
(Cat. No. MAMW-NAN5F)
AN-025187-003
(Cat. No. MAMW-NAN3L)
AN-125001-002 (mount)
with AN-225001-001
(element)
AN-125001-002 (mount)
with AN-225001-005
(element)
CA-012349-001
(Cat. No. MAMW-NCL8B)
CA-013671-010
CA-013671-020
CN-014756
KT-012350-001
(Cat. No. MAMW-NMK5F)
KT-015037
KT-014494-002
CD-014027-001
* Driven elements of AN102800V1 and AN102800V2 must be trimmed to proper lengths in order to minimize
antenna system VSWR.
4.2

MATERIAL INSPECTION

CAUTION
Upon removing items from the carton and verifying that all equipment is accounted for, proceed with the
installation.
24
Antenna, 700/800 MHz GPS Combo, Rooftop-Mount, 5 dBd Gain, NMO
Mounting Base, 15-foot (4.6-meter) RG-58 A/U (or equivalent) Low-Loss
RF Cable, Male TNC and Mini-UHF RF Connectors, 16.5-foot (5-meter)
RG174/U (or equivalent) GPS RF Cable with Male SMA RF Connector
(attached); 2.7 to 3.3 Vdc or 4.8 to 5.2 Vdc Bias; Factory-Tuned.
Antenna, GPS Receive Only, Roof-Mount, 17-foot (5.2-meter) RG174/U
(or equivalent) RF Cable with Male SMA RF Connector (attached); 2.7 to
3.3 Vdc or 4.8 to 5.2 Vdc Bias.
Antenna, GPS Receive Only, Magnetic-Mount, 17-foot (5.2-meter)
RG174/U (or equivalent) RF Cable with Male SMA RF Connector
(attached); 2.7 to 3.3 Vdc or 4.8 to 5.2 Vdc Bias.
Antenna, 700/800 MHz, Standard Rooftop-Mount, 3 dBd Gain, NMO
Mounting Base, 15-foot (4.6-meter) LMR-195 (or equivalent) Low-Loss RF
Cable, Male TNC and Mini-UHF RF Connectors; Factory-Tuned.
Antenna, 700/800 MHz, Standard Rooftop-Mount, 5 dBd Gain, NMO
Mounting Base, 15-foot (4.6-meter) LMR-195 (or equivalent) Low-Loss RF
Cable, Male TNC and Mini-UHF RF Connectors; Factory-Tuned.
Cable, M5300/M7300 Option. See page 66.
Cable, TIA/EIA-232 Serial Programming (10 feet). See page 69.
Cable, TIA/EIA-232 Serial Programming (20 feet). See page 69.
Connector, RF; TNC Male Crimp-Type for RG58U, RG58A/U and RGU400
Coaxial Cable.
Kit, GPS Receiver for M5300/M7300.
Kit, Front-Mount to Remote-Mount Conversion for M5300/M7300 Radio.
Includes CH-721 Conversion Kit, CH-721 Mounting Bracket Kit, CH-721
DC Power Cable, CAN Cable, CAN Terminator, Speaker Cable, Etc.
Kit, Remote-Mount to Front-Mount Conversion for M5300/M7300 Radio
and CH-721 Control Head.
Terminator, CAN; 3-Pin, Straight Body.
After removal from the carton, examine the radio, control head and other components
for broken, damaged, loose or missing parts. If any are noted, contact the Customer
Resource Center (see page 20) immediately to discuss and arrange the return of the
equipment to Harris for replacement. Any unauthorized attempts to repair or modify
this equipment will void the warranty and could create a safety hazard.
DESCRIPTION
(Cont.)