Optional Cables; M5300/M7300 Option Cable Ca-012349-001; Figure 13-1: M5300/M7300 Option Cable Ca-012349-001 - Harris M5300 Installation And Safety Manual

MM-015371-001, Rev. C

13 OPTIONAL CABLES

13.1 M5300/M7300 OPTION CABLE CA-012349-001

M5300/M7300 Option Cable CA-012349-001 connects to the 44-pin I/O connector on the rear of the
radio. It breaks out into several smaller standardized connectors, allowing straightforward access to
external I/O interfaces provided by the radio. The cable also shortens radio removal and re-installation
time when required. The cable is shown in Figure 13-1 below, and pin-out details are included in Table
13-1. The cable's 44-pin D-subminiature connector that mates with the connector on the rear of the radio
is identified P1.
P2, the cable's 2-pin connector, provides connections for an external speaker in a front-mount
M5300/M7300 mobile radio installation. P2 is not used in motorcycle installations, which employ a
remote-mount M5300/M7300 mobile radio. In this case, the speaker connection is made at the rear of the
CH-721 control head as the audio amplifier in the control head drives the external speaker.
P1
(Pin-Out
View)
P1
(Side
View)
P1
60
ASSEMBLY DIAGRAM
Approximately 66 inches
(170 centimeters)
WIRING DIAGRAM
(Made From PS-CA-012349 Rev. B)

Figure 13-1: M5300/M7300 Option Cable CA-012349-001

P1
P6
P2
P3
P5
P4