Dimensional Drawing; Troubleshooting; Multiple Unit Power Linking - ADJ ELEMENT QA User Instructions

Element QA
5.63"/143.11mm
Element QA
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 15 fixtures maximum @ 120V. After 15 fixtures you
will need to use a new power outlet.
NOTE: USE CAUTION WHEN POWER LINKING OTHER FIXTURES
TO THE ELEMENT QA AS THE POWER CONSUMPTION OF
OTHER LIGHTING FIXTURES WILL VARY!
ADJ Products, LLC - www.adj.com - Element QA User Manual Page 36

Dimensional Drawing

Multiple Unit Power Linking

Element QA
Disconnect the unit from its power source. Remove the power cord
from the unit. Once the cord has been removed, you will find that the
fuse holder is located inside the power socket. Insert a flat-head screw
driver into the power socket and gently pry out the fuse holder. Remove
the bad fuse and replace with a new one. The fuse holder also has a
holder for a spare fuse.
Element QA
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
2. Make sure that Sound Active mode is activated.
Element QA
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
ADJ Products, LLC - www.adj.com - Element QA User Manual Page 37
Fuse Replacement
Trouble Shooting
Cleaning