Dimensional Drawing - ADJ ENCORE FR50Z User Instructions

Encore FR50z
156mm [6.14in]
Encore FR50z
Listed below are a few common problems the user may encounter, with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are wired correctly (pin 3 is "hot"; on
some other DMX devices pin 2 may be 'hot'). Also, check that all cables are connected to the right
connectors; it does matter which way the inputs and outputs are connected.
Encore FR50z
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried
out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3. Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog resi-
due, dust, dew).
ADJ Products, LLC - www.adj.com - Encore FR50z User Manual Page 17
339.8mm [13.38in]
232.8mm [9.17in]
35.5mm [1.40in]
192.8mm [7.59in]
214.8mm [8.46in]
Dimensional Drawings
116.49mm [4.59in]
238.05mm [9.37in]
Trouble Shooting
Cleaning