Floppy Disk Interface - Contec IPC Series User Manual

5. Each Component Function

Floppy Disk Interface

The PANECON-PC is equipped with a FD controller to allow one
FD drive to be connected to the FD connector named FD on the front
end. Use the FD drive that is available as a dedicated option.
Table 5.12. FD Connector
Connector in use
Pin No.
Compatible Connector on the Cable Side
Plug connector : AMP, P/N
Shield case kit
or
Plug connector : 3M, P/N
Shell
or
Plug connector : 3M, P/N 10126-3000VE
Shell system
Cable Length
Use within a maximum cable length of 60cm.
58
26-socket, half-pitch connector, Equivalent to the DX10G1M-26SE
25
26
Signal
1 HDSEL
3 RDATA
5 GND
7 GND
9 GND
11 WDATA
13 DENSEL
15 DENSEL
17 N.C.
19 DRV_SEL
21 +5V
23 +5V
25 INDEX
1756774-4 (AWG#28 for pressure welding)
: AMP, P/N 1756774-4
10126-6000EL (AWG#28 for pressure welding)
: 3M, P/N 10326-3210-000
(AWG#24 - #30 provided with solder)
: 3M, P/N 10326-52F0-008 (Non-shield shell kit)
Direction Pin No.
Output 2
Input 4
----- 6
----- 8
----- 10
Output 12
Output 14
Output 16
----- 18
Output 20
----- 22
----- 24
Input 26
1
2
Signal Direction
WRTPRT Input
TRK0 Input
GND -----
WGATE Output
GND -----
GND -----
STEP Output
DIR Output
MTR_ON
Output
N.C. -----
DSKCHG Input
N.C.
-----
+5V
-----
User's Manual