STORAGE
FOLDING THE INVERSION TABLE
For your storage convenience, the inversion table can be folded down to place
against a wall, under a bed, or in a storage area. To fold the inversion table pull out
the Ball Spring Knob (18) and loosen Knob (30). Now, slide the Adjustable Boom (3)
all the way up into the frame, until the instep frame is just below the Bed Frame (4),
release the Ball Spring Knob (18) and slide the Adjustable Boom (3) slightly up or
down until the Ball Spring Knob (18) locks the Adjustable Boom (3) in place.
Remove the Bed Frame (4) from the base by lifting up on the Bed Frame (4) until the
Pivot Arms (5) come out of the arm slots located at the top of the Rear U-Frame (2),
(Make sure the Strap is not attached to the Bed Frame before attempting to remove it.)
Push up on the center of the Folding Arms (8) and push the Front and Rear
U-Frames (1, 2) together until they meet. Now the machine is ready to be stored,
allowing you to unfold it quickly and easily whenever you want to use it.
21