Cabinet Installation - Kenmore 580.77157710 Use & Care Manual

Insert the top and bottom rails of the curtain panels
5
into the upper and lower panel guides.
Upper Guide
Left Curtain Panel
Lower Guide
CAUTION
The lower panel guides are easily broken. Be careful
with them when installing the cabinet.
Fasten the curtain panels to the unit with 10 type A
6
screws.
Screws (Type A)
INSTALLATION INSTRUCTIONS
Right Curtain Panel

Cabinet Installation

Center Line
1 ¼" max.
Open the window. Mark a line on the center of the
1
inside sill and extending across the center of the
outside sill.
Loosely attach the sill bracket to the support bracket
using a carriage bolt and a lock nut.
Sill Bracket
Carriage
Bolt
Carefully place the cabinet in the window and align
2
the center hole on the cabinet bottom front with the
center line marked on the window sills. Align the
support brackets with the cabinet track holes and
mark the sill along the sides of each sill bracket.
Remove the cabinet from the window and attach
each sill bracket on the outside sill between the
marks using 2 type B screws.
Carefully place the cabinet back in the window
3
and align the cabinet track holes with the support
brackets. Attach each support bracket to the
cabinet through a cabinet track hole, using a type
D screw and a lock nut. Use the first track hole past
the sill bracket on the outer edge of the window
sill. Tighten the lock nuts on the support brackets to
secure them to the sill brackets. Be sure the cabinet
slants down toward the outside.
9
Inside Sill
Outside Sill
Support Bracket
Lock Nut
Screws (Type B)
Sill Bracket
Screw (Type D)
Lock Nut
Support Bracket