HOW TO USE
In humid weather, excess water may cause the base pan
to overflow. To drain the water, remove the drain cap
and secure the drain pipe to the rear hole of the base
Take care when inserting the drain pipe. Push
away from the sharp fins to avoid slipping and
Press the drain pipe into the hole by pushing down and
away from the fins to avoid injury.
This air conditioner is equipped with a slinger fan. (See
The fan's outer ring picks up the condensed water from
the base pan if the water level gets high enough. The
water is then picked up by the fan and expelled through
the condenser, making the air conditioner more efficient.
You need the following devices and applications to use
the smart features of your air conditioner.
Required Devices: A wireless connection, Kenmore
Smart AC app, and a mobile device.
Required Application: Kenmore Smart AC app.
IMPORTANT: You must download the Kenmore Smart
AC app to your mobile device, connect your Kenmore
Elite Smart appliance to the internet, and register the
appliance to your account by following the prompts.
Connecting the Air Conditioner
Refer to the Quick Start Guide that came with your
smart appliance for detailed instructions on creating
a Kenmore account and setting up the appliance for
connected operation from your mobile device. For
additional assistance, visit http://www.kenmore.com/
Use a mobile device to control the air conditioner
remotely. Start, stop, change modes, adjust temperature,
and set schedules, all from a mobile device.
NOTE: When successfully connected to the internet, the
SMART icon LED on the unit control panel will turn ON.