Inserting The Remote Control Battery; Ventilation; Air Direction - Kenmore 580.77157710 Use & Care Manual

Inserting the Remote Control Battery

Push the release in with your thumb and remove the
1
cover on the back of the remote control.
Insert one new AAA 1.5 V battery, paying attention
2
to the polarity.
NOTE: One new battery is supplied with the air
conditioner for use in the remote control.
Reattach the cover on the remote control.
3
NOTE
Do not use a rechargeable battery. Make sure that the
battery is new.
In order to prevent discharge, remove the battery from
the remote control if the air conditioner is not going to
be used for an extended period of time.
Keep the remote control away from extremely hot or
humid places.
To maintain optimal operation of the remote control,
the remote sensor should not be exposed to direct
sunlight.

Ventilation

Push the ventilation lever in to the closed position
to maintain the best cooling performance. Pull the
ventilation lever out to open the vent and draw fresh air
into the room.
Airflow can be adjusted by changing the direction of the
air conditioner's louvers.
The horizontal airflow is adjusted by moving the lever to
the left or right.
Touch the horizontal louvers to adjust the airflow up or
down.
NOTE: When the weather is extremely hot, the unit may
turn off automatically to protect the compressor.
Close Open
13
HOW TO USE

Air Direction