Add New Trunk Group
Step 1. Press "Add" button to add an new Group Name information.
Step 2. Fill in the required information in Trunk Group Setup page.
Group Name
Number
All Trunk
Trunk Group
Scenario Sample
IP PBX has created two different SIP trunks and one Gateway trunk for outgoing trunks.
Figure 3-17. Add an new Group Name
Figure 3-18. Trunk Group Setup
The Trunk Group name
If the leading digits are match with this number, IP PBX will
delete this number and send out the following digits.
It will show all the available SIP Trunks and Gateway Trunks
for selection.
Choose the trunk at All Trunk box and press the
button to move the activated trunk to Trunk Group box.
Table 3-12. Trunk Group setting description
Figure 3-19. Trunk Group sample setting
25