Planet IPX-300 Series User Manual
  1. Manuals
  2. Brands
  3. Planet Manuals
  4. PBX
  5. Internet Telephony PBX System IPX-300 Series
  6. User manual

Planet IPX-300 Series User Manual

Internet telephony pbx system
Hide thumbs Also See for IPX-300 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Internet Telephony PBX System
IPX-300 Series
User's manual
Version 1.0.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IPX-300 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Planet IPX-300 Series

Summary of Contents for Planet IPX-300 Series

  • Page 1 Internet Telephony PBX System IPX-300 Series User’s manual Version 1.0.2...
  • Page 2 Copyright Copyright (C) 2009 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted.
  • Page 3 Revision User’s Manual for PLANET Internet Telephony PBX System: Model: IPX-300/IPX-300W Rev: 1.02 (March, 2009) Part No. EM-IPX300 Series V1.02...

  • Page 4: Table Of Contents

    TABLE OF CONTENTS Chapter 1 Introduction................ 6 Overview..........................6 Package Content .......................8 Physical Details .........................8 Front Panel Indicators....................8 Rear Panel Indicators....................9 Chapter 2 Preparations & Installation ..........10 Physical Installation Requirement ................10 Network Interface quick configurations ..............11 Chapter 3 IP PBX Setup ..............16 SIP Basic Setting ......................16 User Extensions Setup ....................18 SIP Trunk ........................20...
  • Page 5 IP Phone and Wi-Fi Phone register to IPX-300W ............77 IP Phone and Wi-Fi Phone make off-Net calls via Gateway........81 IP Phone and Wi-Fi Phone make external SIP Proxy calls via SIP Trunk....86 Appendix F ................... 88 IPX-300 Series Specifications ..................88 Appendix G................... 90 IP PBX Voice Sounds......................90...

  • Page 6: Chapter 1 Introduction

    Chapter 1 Introduction Overview PLANET IPX-300/IPX-300W IP PBX telephony systems (“IP PBX” in the following term) are designed and optimized for the small business in daily communications. It can support up to 100 user registrations and easy to install and manage a fully working system with the convenience and cost advantages.
  • Page 7 - Display 100 Registered User’s Status: Unregistered / Registered / On-Call • Call Features - Call Forward Immediate - Call Forward on Busy - Call Forward on No Answer - Call Pickup / Call Park - Caller ID - Music on Hold / Music on Transfer - Call Transfer / Call Hold / Call Waiting - Three-way conference with feature phones (VIP-154T series, VIP-155PT/ 350PT/ 550PT and VIP-156/ 157/ 158/ 161W series)

  • Page 8: Package Content

    Package Content The contents of your product should contain the following items: Internet Telephony PBX system unit Power Adapter Quick Installation Guide User’s Manual CD Physical Details The following figure illustrates the front/rear panel of IP PBX. Front Panel Indicators Figure 1-1.

  • Page 9: Rear Panel Indicators

    Rear Panel Indicators Figure 1-3. Rear Panel of IPX-300 Figure 1-4. Rear Panel of IPX-300W 12V DC 12V DC Power input outlet The reset button, when pressed, resets the IP PBX without the Reset need to unplug the power cord. port supports negotiating...

  • Page 10: Chapter 2 Preparations & Installation

    Chapter 2 Preparations & Installation Physical Installation Requirement This chapter illustrates basic installation of IP PBX • Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors. • TCP/IP protocol must be installed on all PCs. For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem (for WAN port usage) Administration Interface PLANET IP PBX provides GUI (Web based, Graphical User Interface) for machine management and...

  • Page 11: Network Interface Quick Configurations

    In order to connect machine for administration, please Note locate your PC in the same network segment (192.168.0.x) of IP PBX. If you’re not familiar with TCP/IP, please refer to related chapter on user’s manual CD or consult your network administrator for proper network configurations. Network Interface quick configurations Wizard for Quick Setup of the IP PBX, after finishing the authentication, please click “Wizard”...
  • Page 12 The IP PBX must access remote AP .Please be sure that have account to access from remote AP. In this WISP & AP mode the network interface will change from WAN port to LAN port and all of network access will through by remote AP. Step2.
  • Page 13 Figure 2-4. Wizard-AP settings Step3. NAT Setting LAN IP Setting Private IP address for connecting to a local private network. LAN IP Address (Default: 192.168.0.1) Subnet mask for the local private network (Default: Subnet Mask 255.255.255.0) DHCP Server Enable to open LAN port DHCP server DHCP server range from start IP to end IP Assigned DHCP IP Address Client to ask DHCP server refresh time, range from 60 to...

  • Page 14: Service Provider

    Step4. IPPBX Setup The IP PBX allows multiple ITSP providers / User Extensions registration by simply fill-in the required information in the provided table. Figure 2-6. Wizard-IP PBX settings Service Provider: Caller ID Service provider name Input Provider name Username Password Input Provider password Input Providers server address...
  • Page 15 Figure 2-7. Wizard-Rebooting Please consult your ISP personnel to obtain proper PPPoE/IP Note address related information, and input carefully. If Internet connection cannot be established, please check the physical connection or contact the ISP service staff for support information.

  • Page 16: Chapter 3 Ip Pbx Setup

    Chapter 3 IP PBX Setup SIP Basic Setting SIP (Session Initiation Protocol) is a request-response protocol, dealing with requests from clients and responses from servers. Participants are identified by SIP URLs. Requests can be sent through any transport protocol. SIP determines the end system to be used for the session, the communication media and media parameters, and the called party's desire to engage in the communication.
  • Page 17 SIP Codecs The Codec is used to compress the voice signal into data packets. Each Codec has different bandwidth requirement. There are 7 kinds of codec. To determine the priority, selects one codec algorithm from the pull-down menus individually. Figure 3-2. SIP codecs settings Outbound SIP Registrations Figure 3-3.

  • Page 18: User Extensions Setup

    How often to refresh externhost if used. You may specify a local network Extern Refresh in the field below. localnet=192.168.0.0/255.255.0.0; All RFC 1918 addresses are local networks Local Network localnet=11.0.0.0/255.0.0.0 ; Also RFC1918 Address localnet=171.16.0.0/12 ; Another RFC1918 with CIDR notation localnet=168.254.0.0/255.255.0.0;...
  • Page 19 Figure 3-6. Extension advance settings User Extension Input Extension number Input Extension password Password Caller Id Input Extension caller id Table 3-5. Extension advance description Try peer-to-peer RTP : If select yes, allow RTP transmission to try peer-to-peer for sip extension device between. Call group / Pickup group select : Call Group An Extension can set single/multiple call group(s) 1-10 id...

  • Page 20: Sip Trunk

    Call forward option : Call forward always Input forward always number Input forward on busy number Call forward on busy Call forward no answer Input forward no answer number If time out “XXX” sec This is the maximum number allowed no answer time out used Table 3-7.
  • Page 21 Figure 3-9. Service provider advance setup The caller ID will be sent between the callee and caller and will Caller id be displayed on SIP device LCD panel for identification. User name for authentication User name Password User password for authentication Proxy Server address Assigns the SIP Proxy Server’s IP address / Domain name Port number of SIP Proxy Server.

  • Page 22: Gateway Trunk

    Gateway Trunk Gateway Trunk Setting allows IP PBX makes VoIP calls to external Gateway by peer-to-peer mode. If the FXO ports of external Gateway have connected with PSTN lines, the user can make outgoing PSTN calls via external Gateway by this function. Figure 3-10.
  • Page 23 Add New Trunk Group Step 1. Press “Add” button to add an new Group Name information. Figure 3-14. Add an new Group Name Step 2. Fill in the required information in Trunk Group Setup page. Figure 3-15. Trunk Group Setup Group Name The Trunk Group name If the leading digits are match with this number, IP PBX will...

  • Page 24: Dialing Rules

    One-Stage Call: 1. If user dials 81123456, this call will hunt SIP_Trunk_1 and send 123456 to call out. 2. If user dials 82234567, this call will hunt SIP_Trunk_2 and send 234567 to call out. 3. If user dials 0345678, this call will hunt FXO_Gateway and send 345678 to call out. Two-Stage Call: 1.

  • Page 25: Attendant Extension

    Scenario Sample Figure 3-18. Dialing Rules list 1. If user dials 12, this call will hunt SIP_Trunk (proxy888) and send 77 to call out. 2. If user dials 02345, this call will hunt Gateway Trunk (172.16.0.10) and send 902345 to call out.

  • Page 26: Attendant Message

    Sample: Figure 3-20. Auto-attendant sample Attendant Message The Attendant Message on the IP PBX systems, it can auto-answer attendant message setting on the attendant time, IP PBX message can play voice to SIP Trunk and Gateway's FXO, and FXS port. Figure 3-21.

  • Page 27: Attendant Time

    G.11( .gsm ) You can upload gsm format voice file to IP PBX. Associate a dial number with a call group voice instruction to Service Number instruct incoming calls. Ext./Hunt Group Specificity the call group hunting. Table 3-13. Attendant Messages setup description Attendant Time Defined Attendant Time on the IP PBX systems, it can answer attendant message to match on the attendant time.

  • Page 28: Record Auto Attendant

    Date Setting Defined Start Date / End Date Select play voice message Message Auto Attendant Service Choose a auto attendant service type, there are 3 types of method combination setup. Always play attendant After caller hear the voice menu or don't want the caller get message any helps Three times, the call will be drops.

  • Page 29: Upload Voice File

    Answer Extension enable you to record the customized voice menu remotely from a registered IP-Phone. Answer extension Call from registered IP-Phone to record the voice menu. Table 3-16. Answer extension description Upload Voice File This page allows transfer music on hold file or PBX Voice Files from your PC to IP PBX. Please refer to Appendix C for detail descriptions.

  • Page 30: Gereral Setting

    Figure 3-28. Call parking settings Set an extension number to dial when need to park the Extension to Dial for Parking Calls call. Default number is 700. Set the Extension range for call parking retrieving. What extension to park calls on (Example: '701-720').

  • Page 31: Voice Mail

    Enable: Dial the “ *1 + number ” enable call forward always function Call forward always Disable: Dial the “ * 2” disable call forward always function Enable: Dial the “ *3 + number ” enable call forward busy function Call forward Busy Disable: Dial the “...
  • Page 32 Figure 3-32. Voice mail settings Max time of a voice mail Set a voice mail max time Max number of messages per folder Max number of voice mail per folder Dial “ *12 “ into voice mail guide Dial voice mail number Dial my voice mail number Dial “...

  • Page 33: Hunt Group Setting

    Hunt Group Setting This setting will allow the caller to choose the specific extension group to answer the phone (e.g. Press 9 for Operator). Every incoming call (from Service Provider or Attendant Extension) will first hear the pre-recorded On / Off Duty Voice for call group options for caller to select. Users can also setup multiple groups to manage the incoming calls.
  • Page 34 1. Round Robin: Take turns ringing each available Extension / Users 2. Ring All: Ring all Extension/Users, until any one Extension / Users answer the call. 3. Random: Ring random group inside Extension / Users Associate a dial number with a call group voice instruction to instruct incoming calls (e.g.

  • Page 35: Call Screen

    Step 2. Press to delete extension/users to ring group. Figure 3-40. Delete Extension/User Call Screen Call Screen allows you to block outgoing (for SIP trunk / gateway trunk) calls from SIP extension user number. Figure 3-41. Call Screen settings Add New call group Step 1.
  • Page 36 Figure 3-43. Call Screen settings This sample reject prefix number is 0113 for sip extension 500,501,502 group. Call screen group name Input your call screen group name. All Reject This option is reject all outgoing call. Reject Number (Input 1 to 4 number) Input 1 to 4 reject prefix number. Table 3-25.
  • Page 37 I think this can be easily be done by using long group number. Figure 3-45. Call Screen settings-Application 2 The user now needs to dial 77963(as password) to make call by this trunk Group 3 must be close to all traffic, open only to dial extension numbers. Select All Reject Choose the extensions that you don’t want it to make calls.

  • Page 38: Chapter 4 Network Setup

    Chapter 4 Network Setup WAN & LAN Setup WAN (Wide Area Network) is a network connection connecting one or more LANs together over some distance. For example, the means of connecting two office buildings separated by several kilometers would be referred to as a WAN connection. The size of a WAN and the number of distinct LANs connected to a WAN is not limited by any definition.
  • Page 39 Static IP If you are a leased line user with a fixed IP address, enter in the IP address, subnet mask, gateway address, and DNS (domain name server) address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four IP octets separated by a dot (x.x.x.x).
  • Page 40 Figure 4-3. WAN-DHCP settings PPPoE Point-to-Point Protocol over Ethernet (PPPoE). Some ISPs provide DSL-based services and use PPPoE to establish communication link with end-users. If you are connected to the Internet through a DSL line, check with your ISP to see if they use PPPoE. If they do, you need to make sure the following items, PPPoE User name: Enter username provided by your ISP.
  • Page 41 called www.IP-PBX.com. When we need to find the host name from an IP address we send a request to the host using its IP address. The host will respond with its host name. WAN Port MAC The MAC (Media Access Control) Address field is required by some Internet Service Providers (ISP). The default MAC address is set to the MAC address of the WAN interface in the device.
  • Page 42 Figure 4-6. MTU and MRU settings For Static IP, both MTU and MRU are set to 1500 bytes as default value. Note For DHCP, both MTU and MRU are set to 1500 bytes as default value. For PPPoE, both MTU and MRU are set to 1492 bytes as default value. DNS Server DNS stands for Domain Name System.

  • Page 43: Dhcp

    LAN Setting These are the IP settings of the LAN (Local Area Network) interface for the device. These settings may be referred to as "private settings". You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet. The default IP address is 192.168.0.1 with a subnet mask of 255.255.255.0.
  • Page 44 Expired Time of the DHCP lease for each client computer. DHCP Server is a useful tool that automates the assignment of IP addresses to numbers of computers in your network. The server maintains a pool of IP addresses that you use to create scopes. (A DHCP scope is a collection of IP addresses and TCP/IP configuration parameters that are available for DHCP clients to lease.) Then, the server automatically allocates these IP addresses and related TCP/IP configuration settings to DHCP-enabled clients in the network.

  • Page 45: Wlan Setting (For Ipx-300W)

    WLAN Setting (For IPX-300W) A WLAN is a data communication system that reduces the need for a wired connection, thereby adding new flexibility and convenience to your network. Using electromagnetic waves, WLAN's transmits and receives data over the air, minimizing the need for wired connections and combines data connectivity with user mobility.
  • Page 46 Select OPEN, WPA, WPA-PSK, WPA2, WPA2-PSK, WPA/WPA2 Authentication mix mode, WPA-PSK/WPA2-PSK mix mode .Default is OPEN Method mode. Table 4-5. AP mode description Example: Figure 4-13. AP mode application AP-Client Mode In this mode the IP PBX is used to access the Wireless Service Provider network by connecting wirelessly to the remote (Outdoor AP).
  • Page 47 Note When IP PBX operate in AP-Client Mode, the WAN and LAN RJ-45 interface will be configured as a 2 port switch for connecting with 2 PCs for access wireless network For wireless connected type 802.11 B/G mixed/ 802.11b only / WLAN Mode 802.11G only Remote AP SSID...
  • Page 48 Figure 4-15. AP-Client mode settings Figure 4-16. Search remote AP list page Note After scan and select the Outdoor AP, the channel and encryption method should be set the identical with the remote...
  • Page 49 Example: Figure 4-17. Ap-Client mode application WISP & AP Mode The IP PBX can operate in AP-Client and access to another (Outdoor) AP. The wireless client needs to have the same SSID, Channel, Encryption settings as the main AP. The user may need to change the default IP to avoid IP conflicts.
  • Page 50 Note When IP PBX operates in AP-Client (or WISP & AP) Mode, the WAN and LAN RJ-45 interface will be configured as a 2 port switch for connecting with 2 PCs for access wireless network. For wireless connected type 802.11 B/G mixed/ 802.11b only / WLAN Mode 802.11G only Remote AP SSID...
  • Page 51 Figure 4-19. WISP & AP mode settings Scan usable network：Select list to remote AP SSID (magnifying glass) Figure 4-20. Search remote AP list page Note After scan and select the Outdoor AP, the channel and encryption method should be identical with the remote AP...

  • Page 52: Access Policy (For Ap And Wisp&Ap Mode)

    Example: Figure 4-21. WISP & AP mode application Access Policy (For AP and WISP&AP mode) In IP PBX security, an access control list is a list of “allow Access Policy all / Reject all" to an MAC. MAX MAC List：64 Access Control List Table 4-8.

  • Page 53: Static Route

    Figure 4-23. Access policy settings Static Route Static routes are special routes that the network administrator manually enters into the router configuration for local network management. You could build an entire network based on static routes. The problem with doing this is that when a network failure occurs, the static route will not change without you performing the change.

  • Page 54: Nat

    NAT (Network Address Translation) serves three purposes: Provides security by hiding internal IP addresses. Acts like firewall. Enables a company to access internal IP addresses. Internal IP addresses that are only available within the company will not conflict with public IP. Allows a company to combine multiple ISDN connections into a single internet connection.
  • Page 55 Network Address Enable/Disable NAT. Translation IPsec (Internet Protocol Security) is a framework for a set of protocols for IPSec Pass Through security at the network or packet processing layer of network communication. Enable/Disable this framework verification. PPTP (Point-to-Point Tunneling Protocol) is a protocol that allows PPTP Pass Through corporations to extend their own corporate network through private "tunnels"...
  • Page 56 LAN network. Depending on the requested service (TCP/UDP port number), the device redirects the external service request to the appropriate server within the LAN network. You will only need to input the LAN IP address of the computer running the service and enable it. A Virtual Server is defined as a service port, and all requests to this port will be redirected to the computer specified by the server IP.

  • Page 57: Packet Filter

    Figure 4-28. Port trigger settings Enable Enable/Disable the port trigger, default setting is Disable. This is the port used to trigger the application. It can be either a single Trigger Port port or a range of ports. Trigger Type This is the protocol used to trigger the special application. This is the port number on the WAN side that will be used to access Public Port the application.
  • Page 58 The WAN IP port packet filter function, control a network IP port, Enable/Disable default setting is Enable. Enable/Disable the Internet to WAN IP source port rules, default Enable setting is Disable. Source IP This is the filter WAN IP address. Example: 209.131.36.158 Dest.

  • Page 59: Url Filter

    Block Day setting, select a All / Mon-Sat./ Mon-Fri./Mon./ Tues./ Wed./Thu./Fri./Sat./Sun. Time Block Time setting, select time range is 00:00 to 23:59 Table 4-15. Packet filter-MAC description URL Filter URL filter allows you to block sites based on a black list and white list. Sites matching the black list but not matching the white list will be automatically blocked and closed.

  • Page 60: Upnp

    Figure 4-31. Security settings Intrusion Detection Enable / Disable , network / internet security protection. Drop Malicious Enable / Disable , Detect and drop malicious application Packet layer traffic. Table 4-17. Security description UPnP UPnP provides support for communication between control points and devices. The network media, the TCP/IP protocol suite and HTTP provide basic network connectivity and addressing needed.
  • Page 61 DDNS, the users should use the WAN IP to reach internal server. It is inconvenient for the users if this IP is dynamic. With DDNS supported, you apply a DNS name (e.g., www.IPPBX.com) for your server (e.g., Web server) from a DDNS server. The outside users can always access the web server using the www.IP-PBX.com regardless of the WAN IP.

  • Page 62: Sntp

    website Table 4-19. DDNS description SNTP The simple network management protocol (SNMP) forms part of the internet protocol suite as defined by the Internet Engineering Task Force (IETF). SNMP is used by network management systems to monitor network-attached devices for conditions that warrant administrative attention. It consists of a set of standards for network management, including an Application Layer protocol, a dIP-PBXbase schema, and a set of dIP-PBX objects.

  • Page 63: Chapter 5 Management

    Chapter 5 Management Admin Account The administrator account can access the management interface through the web browser. Figure 5-1. Management settings Assign a name to represent the administrator account. Maximum 16 Administrator Name characters. Legal characters can be the upper letter “A” to “Z”, lower letter “a”...

  • Page 64: Date & Time

    The administrator name and password are case-sensitive Note and the “blank” character is an illegal character Only the administrator account has the ability to change account password. Date & Time Manual Time Setting Figure 5-2. Date/Time-Manual time settings Manual Time Setting Set up the time manually.

  • Page 65: Ping Test

    Protocol used to help match your system clock with an accurate NTP Time Server time source. For example atomic clock or a server. Choose your time zone, Default is (GMT+8:00) Beijing, Time Zone Singapore, Taipei. Enable / Disable. Default is Disabling, time during which clocks Daylight Saving are set one hour ahead of local standard time;...

  • Page 66: Factory Default

    Factory Default This function is used to restore all the parameters back to factory default setting. You can use the Save/Restore Setting to check the factory default configuration, after you click on the Set button. Figure 5-6. Factory default settings Admin Account You can upgrade the firmware of the device using this tool.

  • Page 67: Chapter 6 Information

    Chapter 6 Information System Information System Information page indicates the current setup-status of the device, it includes LAN, WAN, (Status and MAC Address), Host Name / System Date time / Machines Life time and system firmware information. The information and options on this page will vary according to your WAN setting (Static IP, DHCP, or PPPoE).

  • Page 68: Pbx Extension Status

    PBX Extension Status This page displays the information of Extension/Users Registration status. Figure 6-2. Extension Status SIP device is connected to IPPBX Register OK The connection from/to the other end of SIP device is Talk on the telephone established. Sip device is not connected to IPPBX Register Unknown Table 6-1.
  • Page 69 Recorded information include: Source Number, Destination Number, Start Time, Answer Time, End Time, Duration Time and Status. Figure 6-4. Call Detail Record Press to go to the Next page; Press to go to the Previous page Source No Caller’s ID Destination No ID of destination extension / user Start Time...

  • Page 70: Appendix A

    Appendix A How to use Call Parking function The followings are the Call Park function settings, and all of VoIP devices (ATA, GW and IP Phone) were registered with Wi-Fi IP PBX. Extension to Dial for Parking Calls: 700 Extensions to park calls on :701-720 Figure A-1.

  • Page 71: Appendix B

    Appendix B How to use Call Pick-up function The followings are the Call Pickup function settings, and all of VoIP devices (ATA, GW and IP Phone) were registered with IP PBX. Pickup Extension: *8 Figure B-1. Call Pickup sample scenario Ext.300 call to Ext.100, and Ext.100 is ringing.

  • Page 72: Appendix C

    Appendix C How to record Sound and replacement Sounds package This sample for how to record sound as gsm format file for IP PBX use, and to replacement the Sounds package. What do you need? 1. Original Sound file in English version: sounds.tar.gz (*) 2.
  • Page 73 3. Press Select your recording sound device and record channel or recording volume level. 4. Press Start recording 5. Save the current file as WAV or gsm format to finish.
  • Page 74 Step3: Replace the original file, and please don’t change the file name. Step4: Compress the sounds folder to a zipped file with using izarc, and please reverence the following for the steps. 1. After installed Izarc. 2. Right Click and then select “Add to Archive File...”.
  • Page 75 Step5: Please login the Web UI of IP PBX, and select Voice Management - > Upload Voice File, and then click the "Browse" button to allocate the “sounds. tar” on your PC. Once the file is selected, please click “Upload “to start the upgrade process.

  • Page 76: Appendix D

    Appendix D Record Voice Guide Process IPX-300W provides Record Voice Menu by Phone function. Please register your VoIP devices to Wi-Fi IP PBX at first, and then check the Record voice code from “IP PBX Setup -> record Voice Menu” page. Figure C-1.

  • Page 77: Appendix E

    Appendix E Voice Communication Samples The chapter shows you the concept and command to help you configure your IP PBX System through sample configuration. And provide several ways to make calls to desired destination in IP PBX. In this section, we’ll lead you step by step to establish your first voice communication via web browsers operations.
  • Page 78 Figure D-2. WLAN Setting of IPX-300W STEP 2: Browse to “IP PBX Setup User Extensions Setup” configuration menu. Figure D-3. User extension setting of IP PBX STEP 3: Click the “Add” button to create extension account ext.100 and ext.101.
  • Page 79 Figure D-4. Add extension setting of IP PBX STEP 4: Please log in VIP-154T and browser to “SIP setting Domain Service” configuration menu. Insert the account/password information then save and reboot machine. The sample configuration screen is shown below: Data match with Figure D-3. IP PBX’s extension settings The IP address of IP PBX...
  • Page 80 The IP address of IP PBX Figure D-6. SIP settings of VIP-192 Then browse to “SIP Account Settings” configuration menu and fill in the account/password information. The sample configuration screen is shown below: Data match with Figure D-3. IP PBX’s extension settings Figure D-7.

  • Page 81: Ip Phone And Wi-Fi Phone Make Off-Net Calls Via Gateway

    IP Phone and Wi-Fi Phone make off-Net calls via Gateway In the following samples, we’ll introduce VIP-154T and VIP-192 makes off-Net Calls (PSTN calls) via VIP-480FO applications. Figure D-9. Installation example with VIP-480FO Machine Configuration: STEP 1: Please refer to the first sample and let VIP-154T and VIP-192 register to IP PBX. STEP 2: Please log in IP PBX via web browser and browse to “IP PBX Setup User Extensions Setup”...
  • Page 82 STEP 3: Browse to “IP PBX Setup Attendant Extension” configuration menu. Assign an attendant number which inexistence extension in Extension List and the sample configuration screen is shown below: Figure D-11. Assign an attendant number Pressing the “Submit” button for activate the configuration. STEP 4: Browse to “IP PBX Setup Trunk Management...
  • Page 83 Figure D-13. Add Trunk Group number for grabbing the FXO ports of VIP-480FO STEP 6: Please log in VIP-480FO via web browser and browse to “Advance Setup VoIP Setup VoIP Basic” configuration menu. Insert the account/password information and set up the hunting function. The sample configuration screen is shown below: Figure D-14.
  • Page 84 STEP 7: Browse to “Dialing Plan” configuration menu. Add an Incoming Dial Plan (no.1x) for redirect the PSTN outgoing calls to FXO ports. Figure D-17. Add an incoming dial plan STEP 8: Browse to “Port Status” configuration menu. Fill in the auto attendant number 555 to all of ports. ( Where 555 is the auto-attendant number of IP PBX ) Figure D-18.
  • Page 85 Test the Scenario: 1. VIP-154T pick up the telephone 2. Dial the number: will hear the dial tone, and dial the number: 12345678. This call will hunt the FXO port of VIP-480FO and shall be able connect to the User A. 3.

  • Page 86: Ip Phone And Wi-Fi Phone Make External Sip Proxy Calls Via Sip Trunk

    IP Phone and Wi-Fi Phone make external SIP Proxy calls via SIP Trunk In the following samples, we’ll introduce VIP-154T and VIP-192 makes SIP Proxy calls via SIP Trunk applications. Figure D-20. Installation example with VIP-480FO Machine Configuration: STEP 1: Please refer to the first sample and let VIP-154T and VIP-192 register to IP PBX.
  • Page 87 STEP 3: Browse to “IP PBX Setup Trunk Management Trunk Group” configuration menu. Add a Trunk Group for making external SIP Proxy calls. Figure D-22. Add Trunk Group number STEP 4: After the SIP Trunk has registered to FWD SIP Proxy successfully, the Service Provider Status page will show the registration status: Figure D-23.

  • Page 88: Appendix F

    Appendix F IPX-300 Series Specifications Product Internet Telephony PBX System Wi-Fi Internet Telephony PBX System Model IPX-300 IPX-300W Hardware IEEE 802.11 b/g WLAN Standards Wireless Frequency 2.4GHz ~ 2.4835 GHz Range 64/128 bit WEP data encryption, WPA, WPA-PSK, WPA2, WPA2-PSK, WPA /...
  • Page 89 Backup and Restore Configuration file Call/Pickup Group Displays 100 Registered User’s Status: Unregistered / Registered / On-Call Displays 20 Registered Trunk’s Status: Unregistered / Registered Fax Support using G.711 Pass-Through or T.38** Caller ID Call Group Call Hold Call Waiting Call Transfer Call Forward (Always, Busy, No Answer) Call features...

  • Page 90: Appendix G

    Appendix G IP PBX Voice Sounds PBX-files agent-pass.WAV: Please enter your password followed by the pound key. auth-incorrect.WAV: Password incorrect. Please enter your password followed by the pound key. auth-thankyou.WAV: Thank you beep.WAV: "beep tone" beeperr.WAV: "beep tone" offduty.WAV: Now is off hour , if you know the extension of the party "you" wish to reach, dial now, or call again tomorrow onduty.WAV: Thank you for calling, if you the extension of the party "you"...
  • Page 91 conf-noempty: No empty conferences currently exist. conf-onlyone: There is currently one other participant in the conference. conf-onlyperson: You are currently the only person in this conference. conf-otherinparty: other participants in the conference conf-placeintoconf: You will now be placed into the conference. conf-thereare: There are currently conf-unlockednow: The conference is now unlocked conf-unmuted: You are now unmuted...
  • Page 92 vm-INBOX.WAV: new vm-incorrect-mailbox.WAV: Login incorrect. Mailbox? vm-instructions.WAV: To look into your messages press 1 now. You may quit voicemail at any time by pressing the pound key. vm-intro.WAV: Please leave your message after the tone. When done hang up or press the pound vm-isonphone.WAV: is on the phone vm-isunavail.WAV: is unavailable vm-last.WAV: last...
  • Page 93 vm-reachoper.WAV: press 0 to reach an operator vm-rec-busy.WAV: After the tone say your busy message and then press the pound key. vm-received.WAV: received vm-rec-name.WAV: After the tone say your name and then press the pound key. vm-rec-temp.WAV: After the tone, say your temporary message, and then press the pound key vm-rec-unv.WAV: After the tone say your unavailable message and then press the pound key vm-reenterpassword.WAV: Please re-enter your password followed by the pound key vm-repeat.WAV: Press 5 to repeat the current message...
  • Page 94 vm-youhave.WAV: you have digit-files a-m.WAV: A.M. p-m.WAV: P.M. today.WAV: today tomorrow.WAV: tomorrow yesterday.WAV: yesterday at.WAV: at oclock.WAV: o'clock oh.WAV: oh pound.WAV: pound star.WAV: star thousand.WAV: thousand Number 0.WAV: zero 1.WAV: one 2.WAV: two 3.WAV: three 4.WAV: four 5.WAV: five 6.WAV: six 7.WAV: seven 8.WAV: eight 9.WAV: nine...
  • Page 95 60.WAV: sixty 70.WAV: seventy 80.WAV: eighty 90.WAV: ninety Weekday day-0.WAV: Sunday day-1.WAV: Monday day-2.WAV: Tuesday day-3.WAV: Wednesday day-4.WAV: Thursday day-5.WAV: Friday day-6.WAV: Saturday month mon-0.WAV: January mon-1.WAV: February mon-2.WAV: March mon-3.WAV: April mon-4.WAV: May mon-5.WAV: June mon-6.WAV: July mon-7.WAV: August mon-8.WAV: September mon-9.WAV: October mon-10.WAV: November...
  • Page 96 h-12.WAV: twelfth h-13.WAV: thirteenth h-14.WAV: fourteenth h-15.WAV: fifteenth h-16.WAV: sixteenth h-17.WAV: seventeenth h-18.WAV: eighteenth h-19.WAV: nineteenth h-20.WAV: twentieth h-30.WAV: thirtieth...

Table of Contents