(4) Check the reading on the LCD without pressing TEST or remote control
button. The instrument detects AC/ DC automatically, and shows "DC"
for dc input and "AC" for ac input on the LCD.
● As for dc inputs, the negative polarity sign "-" is displayed to the left of
the reading where the line probe side is charged with negative polarity.
● When the measured voltage is less than 5 V, any of AC, DC or polarity
symbols don't appear.
When the measured result exceeds the display range (over-range), the
LCD reads as follows.
AC voltage
Positive DC voltage
Negative DC voltage
Display example
.800.561.8187
: > 629 V
: > 1049 V
: <- 1049 V
Current time
(Hour: Min.)
www.
- 45 -
̶ 45 ̶
.com
Measured value
Fig. 10-3
information@itm.com