Event - Advantech EKI-1526 User Manual

Item
Trap Server
Trap Server Port
Trap Version
Trap Community
SNMP Agent Setting
Read Community
Write Community
Contact
Location
Save
6.7.2

Event

In this page, you can configure events which will trigger logging or notification. You
can select three methods (Mail, SNMP, or log file) to record or send event messages.
System event notification is available for cold start, warm start, authentication failure,
IP address/Password change, serial DCD/DSR port change and Ethernet link down
information.
EKI-1526(TI) | 1528(TI) User Manual
Description
Use this field to indicate the IP address to use for receiving SNMP
traps.
Enter the SNMP Trap server port.
(default = v1): Use this field to select the SNMP trap version.
Use this field to designate the SNMP trap community.
Read community name of your agent.
Write community name of your agent.
Identify the system contact of your agent.
Identify the system location of your agent.
Click Save to save the values and update the screen.
64