Click on each item to enter the configuration page to change the setting. The configu-
ration will be introduced in the following sections.
3.4.3
Network Settings
Prior to setting up the server's IP address, determine the IP address mode.
There are four mode types available:
Static IP: mode to assign a specific assigned address
DHCP / AutoIP: mode to automatically assign IP addresses through a DHCP
server
BOOTP / AutoIP: mode to automatically assign an IP address through the con-
figuration server
DHCP/BOOTP/AutoIP: mode to automatically assign an IP address using a
Bootstrap Protocol or DHCP server.
The server is set with the following default IP configuration:
10.0.0.1 (Eth1)
10.0.0.2 (Eth2)
Figure 3.12 Viewing Basic Settings
25
EKI-1526(TI) | 1528(TI) User Manual