6.
Under Devices and Printers, click on the Device Manager link. A new window
displays showing a list of all the available devices on your computer.
7.
Locate Ports (COM & LPT) and click on the expand icon. A list of all available
serial and parallel port devices display.
The newly mapped VCOM port should be listed under the same mapped set-
tings used in the previous steps.
Figure 5.10 System Port VCOM Mapping Configuration
The newly mapped VCOM port is listed under the same mapped settings used in the
previous steps. The settings correspond to the VCOM port configuration on the EKI
device, see the following figure.
If the settings do not correspond, the VCOM mapping is not correct. See "Virtual
COM Port Mapping" on page 43 to re-map the VCOM ports.
EKI-1526(TI) | 1528(TI) User Manual
Figure 5.11 Verifying VCOM Mapping Configuration
48