Usdg Data Tcp Server Mode; Figure 4.4 Peer For Receiving Data; Figure 4.5 Usdg Tcp Server Mode; Figure 4.6 Usdg Data Mode - Advantech EKI-1526 User Manual

In the Peer for Receiving Data menu, entering "LocalPort=0" as the value for the
Local Port will assign a random TCP Port for an EKI device.
4.3.2

USDG Data TCP Server mode

In TCP server mode, the TCP connection is initiated from the host to the EKI serial
device server. This operation mode supports a maximum of five simultaneous con-
nections for each serial port on an EKI serial device server from a single or multiple
hosts. However a multi-host connection simultaneously transmits the data from a sin-
gle serial port.
EKI-1526(TI) | 1528(TI) User Manual

Figure 4.4 Peer for Receiving Data

PC
EKI-1526I
9 10
11 12 13 14 15
16

Figure 4.5 USDG TCP Server Mode

Figure 4.6 USDG Data Mode

38