Bypassing Protection Zones; Using The Bypass Key - ADEMCO Security System VISTA-10SE User Manual

BYPASSING PROTECTION ZONES

T
Using the his key is used when you want to arm your system with one or more zones intentionally
unprotected. The system must be disarmed first.
6 BYPASS Key
1. Enter your security code and press the BYPASS key.
LIMITATION
2. Enter the zone number(s) for the zone(s) to be bypassed (e.g., 06, 10, 13, etc.).
The system will not
allow fire zones to
3. When finished, the keypad will momentarily display a "Bypass" message for each by-
be bypassed.
All bypasses are removed
4. Arm the system as usual.
when an OFF sequence
Bypassed zones are unprotected and will not cause an alarm if violated
(security code plus OFF)
while your system is armed.
is performed.
Single digit zone numbers must be preceded by a zero (e.g. 05, 06) .
passed zone number. Wait for these zones to be displayed, to confirm their bypass.
TO BYPASS ZONES:
• Enter Code.
• Press Bypass Key.
• Enter Zone Nos.
• Wait For Bypassed Zones
To Be Displayed.
• Arm System As Usual.
– 1 4 –
TYPICAL MOMENTARY DISPLAYS
OF BYPASSED ZONE
BYPASS 06 FRONT
UPSTAIRS BEDROOM
ALPHA
06 AC
BYPASS
FIXED-WORD