Checking For Open Zones - ADEMCO Security System VISTA-10SE User Manual

CHECKING FOR OPEN ZONES

B
Using the
must be closed or bypassed (see BYPASSING PROTECTION ZONES section), otherwise
READY Key
the keypad will display a "Not Ready" message, and if your keypad has a READY indicator
light, it will not be lit. The READY key can be used to display all faulted zones, making it
easier for you to secure any open zone.
To display faulted zones, simply press and release the READY [ ] key (do not enter
code first).
Secure or bypass the zones displayed before arming the system.
A "Ready" message will be displayed when all protection zones have been either closed
or bypassed and the keypad's READY indicator light (if present) will be lit. The system can
then be armed. if desired.
TYPICAL DISPLAYS
WHEN NOT READY TO ARM
DISARMED -
PR ES S
TO S HO W F AU LTS
ALPHA
AC
NOT READY
FIXED-WORD
efore arming your system, all protected doors, windows and other protection zones
TO DISPLAY OPEN ZONES, PRESS THE
TYPICAL DISPLAYS
INDICATING OPEN PROTECTION ZONE
(AFTER PRESSING READY KEY)
FAULT 06 FRONT
UPSTAIRS BEDROOM
ALPHA
06
FIXED-WORD
– 1 3 –
READY
KEY.
TYPICAL DISPLAYS
INDICATING "READY TO ARM"
****
RE ADY TO ARM
AC
NOT READY
DISARMED
****
ALPHA
AC
READY
FIXED-WORD